Pure Anti Corrosion Powder Coating For Pipe Sample Supply Ral Color

3 PE anticorrosion epoxy powder coating

Introduction:

This product adopts linear phenolic epoxy resin, design and manufacture according to GB/T23257-2009. High reactivity, high crosslinking density, coating adhesion, and coating with excellent adhesion, chemical resistance character, cathodic disbonding resistance, good impact resistance.

Feature:

1. Very good adhesion with the substrate.
2. Appropriate gel time and interface performance, easy integration with the intermediate layer and solidified as a whole.
3. Protective effect in the lager temperature range, long-lasting anti-corrosion effect.
4. The coating has excellent high temperature cathodic disbonding resistance.
5. The powder area is large, the ratio of powder is high.
6. Low melting temperature, high reactivity, high curing completion rate, good mechanical performance

Power Specification

Coating Specification

Carried Standard: GB/T 23257-2009

Application Area: Oil, gas and other pipeline anticorrosion coating

Applicable process: Electrostatic Coating

Notes:

1. Steel surface should be no oil and water, surface quality should reach Sa2 1/2 level (GB/T8923), anchor pattern depth 50-90mm, clean dust and abrasive attached to the steel surface.
2. Product should be stored in ventilated, dry, Indoor temperature below 30 ℃, away from heat, corrosive chemicals and chemical solvents, avoid bright light, the maximum stack height should not exceed 4 layers, avoid prolonged pressure, ensure airtight box. In case the clot and damp affects the fluidization performance.
3. To best curing epoxy coating, best anti-corrosion, suggested preheating tube surface temperature in more than 170℃, in order to better improve the curing completion.